Mountable Head Cable Ties

Mounting hole cable ties are effective for use in a wide variety of cable and wire bundling applications that require that a wire or cable bundle be attached to another surface such as a control panel, wall, or ceiling.The one piece construction with a mounting hole feature outside the head of the tie allows for consistent performance and reliability.  This design allows for use of a screw or rivet for clamping.  The wire or cable bundle can be bundled before or after the clamp is in place.Mounting hole cable ties are recommended when position is critical or the application requires the product be premounted to a surface before final assembly. Natural mounting hole cable ties are preferred for indoor use applications while UV Black is recommended for outdoor applications, providing greater resistance to ultraviolet light. Mounting Hole cable ties are available in various lengths and strengths ranging from100MM--380MM(  4”–15”).  Packaging of the Mounting Hole cable ties are in bulk 1000 piece bags or smaller 100 piece bags.

Nyon products

Nyon is hygroscopic, it will absorb moisture, and lose the moisture too. To ensure optimum performance, the material must maintain a 2.5% water. packaging may keep the moisture. In order to keep the quality，it's better to remain the original packaging for Inventories. if stored impropery especally in dry or cold environment, it will lose water from cable ties, and impact the use of cable ties. Once the package is opened; please use out the cable ties as soon as possible.

Here are our suggestion for the cable tie store:

Mounting hole cable ties are effective for use in a wide variety of cable and wire bundling applications that require that a wire or cable bundle be attached to another surface such as a control panel, wall, or ceiling. The one - piece construction with a mounting hole feature outside the head of the tie allows for consistent performance and reliability. This design allows for use of a screw or rivet for clamping. The wire or cable bundle can be bundled before or after the clamp is in place. Mounting hole cable ties are recommended when position is critical or the application requires the product be premounted to a surface before final assembly. Natural mounting hole cable ties are preferred for indoor use applications while UV Black is recommended for outdoor applications, providing greater resistance to ultraviolet light. Mounting Hole cable ties are available in various lengths and strengths ranging from 100MM - 380MM (4" - 15"). Packaging of the Mounting Hole cable ties are in bulk 1,000 pieces bags or smaller 100 pieces bags.

MATERIAL: Polyamide 6.6

Material brand: Huafon626F; Invista 4820L

Flammability of raw material : UL 94 - V2

Humidity absorption: 2,7%-2,8% (23°C -50% R.H.)

Installation temperature: -10°C ~+85°C.

Working temperature:-40°C ~+85°C.

Max sustaiaable tempeature for short time:+110°C.

Good resistance to bases, oils, greases, oil derivates,chloride solvents. Limited resistance to acids.

Not resistant to phenols.

Carbon black addiction gives a better UV resistance (only for Black Cabe Ties)